• <td id="iimik"></td>
  • 你現在的位置:首頁>企業動態


    Nowadays, with the development of science and technology, the manufacturing of many products gradually depends on science and technology. After all, the efficiency of machinery is higher than that of labor, and costs are saved. The automatic framing machine is a kind of machine that will be used when making photo frames. Today, I will tell you about four common faults of the automatic framing machine.
    1. Double nailing is shown. First, the nails do not match, and different manufacturers have different types of nail grooves, simply showing double nails; The second is that the touch head and striker are worn. In this case, just change the touch head and striker.
    2. The air cylinder works, but stepping on the pedal doesn't respond. There are two reasons for this. One is that the solenoid valve has a problem, so it can be replaced. The other is that the pedal circuit has a problem.
    3. The machine is weak in nailing. In this case, a large part of the reason is the aging of the cylinder. The air pressure of the cylinder barometer can be properly adjusted at this time, which can extend the service life of the cylinder. For durable use, it is still necessary to replace the cylinder or the full-automatic frame machine. Another reason is that there may be accumulated water in the air cylinder or the air compressor, so the accumulated water in both cylinders should also be cleaned on time.
    4. How to adjust the nailing speed of batch nailing boxes. This is mainly adjusted by the tightness of the two internal screws on the side of the conditioning cylinder. When the screws are tightened, the speed is slow. When the screws are loosened, the speed is fast.
    The above four points are about some failures of the automatic border machine during operation. I hope they can help you understand the automatic border machine. If you have any questions, you can also consult us http://www.floridases.com !


    • 微信
  • <td id="iimik"></td>